1 -
Resealable Hygienic Bottle Cap Plug
Resealable plug allows for "no-spill" bottle installation
and simple removal of full or partially full water bottles. The
hygienic "water-safe" design prevents substances on the
outside of the bottle from contact with the drinking water.
2 -
Exclusive WaterSafe Bottle Cap
The Specially designed WaterSafe cap works with existing capmachinery.
Tamper-evident design warns you if your water bottle has been previously
opened. Bottle caps fit on most traditional neck 3, 5 and 6 gallon
plastic and glass water bottles.
3 -
No-Spill WaterSafe Top
The No-Spill WaterSafe System is available installed on a CORDLEY/Temprite
bottled water cooler. Conversion Kit/Retrofit Top Adapters are available
for most existing bottled water coolers as explained below.
4 -
Air Filter
Internal air filter removes airborne particles and protects quality
of bottled water from most airborne contaminants. Filter disc is
easily accessible for replacement.
5 -
Seal and Check Valve
Unique seal assembly and air filter check valve provide an airtight
and watertight seal between the feed tube and cooling reservoir.
The seal and check valve also reduce the overflow of water from
the reservoir caused by pinhole and hairline cracks in the bottle.
6 -
Feed Tube
Feed Tube pops open the resealable cap plug and holds it securely
in position for resealing. The feed tube and hygienic cap allow
only fresh bottled water to enter the cooler reservoir